Well, you might be wondering whether it is easy or hard to use a scroll saw, right? It can only be hard if you are not conversant with the operation of the saw. However, if you are so clear about the manner in which the saw operates, then you are assured of easy use. There are a number of things, though, that you should know with regard to the usage of a scroll saw. These things are basically the steps that you should observe when using a scroll saw.
Note: You may read in details at best scroll saw
How To Use A Scroll Saw Follow the Simple Steps
Step 1:
The first thing here is to turn on the saw. Most scroll saws usually come with power buttons to enable you to switch it on and off at your own convenience. Make sure that the saw is powered on before you do anything else.
Step 2
The next thing you should do is making a gentle cut around the pattern that you want to create on the wood. This will help you in creating a clear path that will guide you when making your major cuts. It is recommended that you use a blade that has wide teeth when creating the sketch cut as this will make it very easy for you.
Step 3
Once you are done creating the gentle mark around the stipulated pattern, then next thing is now to create the pattern itself. However, before you get there, it is important to first adjust the speed of the blade. Note that the pattern that you want to make has to be very accurate and presentable at the same time. This is why you have to adjust downwards the speed of the blade that your saw is using. With a slow-moving blade, you will be in a position to have full control over the saw and the material being cut. Make use of the adjustment knob to reduce the speed of the blade. Only use blade speed that does not make you uncomfortable.
Step 4
Now that the speed of the blade you are using has been adjusted to the right range, you are now all set to create your intended pattern. At this point, what you need is scrolling down the blade along the line that you created before. Make sure that the blade is strictly along the marked line. With the help of your two hands, guide the woods being cut in accordance with the earlier-created mark. It is important to ensure that you guide the wood gently as opposed to forcefully. Doing so will ensure that you do not lose track and that your patterns come out very clear and accurate.
Step 5
Once you reach the turning point on the wood, you should then go back, now through the other side of the pattern. Make sure that you are still in line with the line you drew from the beginning. Again, you must use both hands in guiding the material you are cutting against the blade. Move slowly until you meet the other line and the pattern created.
This is in brief how to use a scroll saw.
