Nail pullers are specially made to pull out unnecessary nails even the nails head goes under the workpieces or any surfaces. Generally, it is a metal made, a strong one-handed operating tool
It has a round shape or sometimes hexagonal bar. It curves and formed a tip that is used to grip the nail heads.
Traditionally it consists of a pair of jaws that pull off the nails. These jaws allow it to hit the surface and grip the nails to pull it up. Force is given by its handle or separate hammer.
Sometimes, some nail pullers can destroy the work surface while pulling off nails. The amount of surface ruin depends on a few factors like the product design and user’s application tactics and so on. However, we are going to recommend you especially designed best nail pullers to ensure the least amount of loss.
Some of the Best Nail Pullers
1. Air Locker ap700 Professional Punch Nail RemoverAir Locker ap700 is an exceptional one that runs on air pressure. It presses off a trigger by air pressure that pushes nails to the opposite side of the wood. Thus, the nail comes off the wood from the other side.
The most advancing fact of this tool is that doesn’t make any damage to the wood.
It has a sharp nose that will help you to reach any kind of surface and narrow area. It has a rubberized grip handler that will give you extra comfort while working keeping you safe. Its full body is made of metal that means it is a strong tool to hold.
It is a light tool with a weight of 2.35 pounds. It has a great removable nail range of 10-20 Gauge that actually indicates the acceptable diameter of nails that is can pull off. Its Operating pressure is 80-120 PSI that means you do not need to apply extra force to pull off a nail.
It’s Power Source is Air-Powered so that you do not need to add an external battery or an external power source. You just need to put off the nose of the tool on the tails of the nail and just press the switch to trigger.
In some case after using 100-150 times, the performance of this tool is not satisfactory. In the first 100-150 nails this tool works great but after that, it will make some damage to your wood or the nails will not be triggered properly. Again if your wood is too old or weak, instead of pulling off nails sometimes it push-off the nails that will harm your works.
It is found that this tool doesn’t work well in oak wood. So before using this tool in oak wood, you need to think twice. The metal used to make this tool is not up to the mark. The nose can be broken after some reuses of the tool.
Another fact is you must just need an air pressure source to use this tool. You can’t do anything without air pressure as there is no other option to power it.
2. Crescent NP11 11-Inch Nail Pulling PliersCrescent NP11 11-Inch Nail Pulling Pliers is an exceptional one than others for the double handle that gives it more flexibility and makes the work more comfortable. These rubber handles make the tool easy to grip roll and to apply the force.
This tool came with a very light weight of only 1.5 pounds. For this lightweight, you will be able to work with this one in any situation. You need not a big box to store this tool as well.
This head is different from the traditional design, with the two handle, you just need to press the head to grip the nail head. Then pull off it to denial the wood. This feature will save more than half of the time of de nailing. This feature able the tool to remove staples as well.
Though it has two well-gripped handles, the grip portion of the handle is small. That will make a huge problem to safety if your hand is slippery. With this tool, it is hard to pull off pallet nails.
Another fact is the hinge of the tool is so tight. As a result, you may need to spread them back open with your fingers. As you need to press the nail head to grip, sometimes it may not grip the nail head properly.
3. Crescent 56 Nail PullerCrescent 56 Nail Puller has an 18 inch long enough body that will give you extra facility while pulling off nails from a hardened position. It has a box joined and tempered jaw that will help you to do the job effortlessly.
As said before its jaw is well featured that is the most important part of pulling off nails. Forged alloy and hardened jaw will you to pull off even old and broken nails. The shape of the jaw also limits the damage of the wood and the area around the nail head.
Its handler can be slid up to use as a lever at the time of pulling a heavy load. It can be as long as total 18 inches. So that you can pull the tool with a heavy load. With just a comfortable amount of force, you can pull that off for this lever handler feature.
This tool is too heavy for home works. The wrong placing of your hand while working could hurt yourself. It is hard to reach the tighten corner with this tool. The paint on the tool is not up to the mark.
For bigger nail head it cannot hold them well. Sometimes sliding handler comes off automatically and may hamper your working. The shaft metal on the body is thick, that in some cases of having extra force it may be broken. Then the tool will be useless to you.
4. Dewalt DWHT55524 10 in. Claw BarDewalt DWHT55524 Claw Bar is a multipurpose tool that can pull of nails that have featured in both ends for different purposes. Its claw bar is one of the key features of this tool. Its design is also unique than others.
Its claw bar size is perfect to handle and durability is good enough. The bar will not bend out easily. It has a flat end that ensures the maximum quality of your wood after pulling off nails. Its claws are smooth as well.
Another fact is it can pull off nails without digging the wood from backboards. Its dimple creates a perfect circle for the nails around the nails to grip it and pull off.it helps to create space for the cat’s paw, to get in the slide under the nails and finally pull them off perfectly.
Though it has a well-made claw bar, it’s body is short. It is a big problem when you are working with a big load or try to reach a narrow area. It needs extra force for this reason. It works well with small nails, but you will face a bit of trouble with big nails.
The body is thin that you might find trouble to grip it perfectly. Another fact is this tool is too much light. Though the bar is made well, the metal used in the body is not that much strong that it might be broken or bent if extra force is applied.
5. Stiletto TICLW12 Claw Bar Titanium Nail PullerStiletto TICLW12 Claw Bar Titanium Nail Puller is made of lightweight solid titanium. It is super strong to apply force and less in recoil to shock in comparison to the other steel bars.
This tool came with a perfect size of the body to hold. The material used in the tool gives it more durability and sustainability. The tool is light in weight as well. As titanium used, this tool will not vibrate while using and if hit them with a hammer. Two sides of the nail puller are used equally.
Its nail dimpler is very good at the time of nail come off. It has two options at the two ends. One for getting nails or staples and the other for some leverage. Again the angles are excellent to get leverage. Works great with piecework. For titanium, it will not get rust.
The curve of the head may create some problem to reach under the nails and staples. In case of swinging, the tool may not be perfect at all. Little bit longer body may help in these cases. Sometimes nails keeping slip out. It has no rubber grip that will be a big problem to grip the tool.
6. Stanley FMHT55008 FatMax Claw BarStanley FMHT55008 FatMax Claw Bar, 10 is an instrument which is slightly different from other instruments because of its flat striking face, Polished flat surface, and beveled claws. The flat striking face is used to remove nails those are under deeply embedded. On the other hand, Polished flat surface and beveled claws deal with proper entrance to remove nails.
It has extreme strength and stability because of high carbon spring steel as you can work smoothly. It is sturdy and solid and so when you will use this product it won’t break down easily.
Because of the head of the bar, you can easily pass it into small areas from where you want to remove nails. You can easily remove old nails in flooring and other old wood by using it.
As it is small that’s why you can fit in a loop on the tool belt and not get in the way and get caught on things all the time. Its head will help you from falling through the loop and you can work perfectly with this tool.
It is little shorter and small and so you can’t get enough leverage when you will work with it. By using this claw, it will be difficult to remove big nails. As it is small that’s why when you will work with this product the tips might be slightly bent or uneven.
7. Estwing Nail Puller Double-Ended Pry BarEstwing Nail Puller - 12 Double-Ended Pry Bar is the most durable, longest lasting striking tools which have high leverage design. It has rounded head for added torque and the precision thin claw allows to access hard to reach and confined places.
This Claw is designed as you can remove the headless nail with minimal wood damage. Because of the high leverage design, you will get enough leverage which will make your work easier. It is Perfect for you to window & door trim, hilling and baseboard.
It has a doubleheader which will help you to do two different work. One head is used to remove small nails and the other one is used to remove big nails. When you will work for the heavy-duty purpose it won’t break down because it is hefty enough.
Even in the tough condition, it is easy to hold on. It has a strong prybar. While hammering you won’t feel any vibration. The hooks will not bend in any situation. For more leverage, it is long enough for you.
When you will try to work with the bigger head it’s hard to work in small places. When you will try to remove nails from wood by using this claw you have to dig out the wood to grab the nail and the wood may damage some places.
For big nails, the right-angle side is not long enough to supply you more leverage. Some chemical is used while making this product which is known to The State of California to cause cancer and birth defects.
How to Recognize the Best Nail Puller
Let’s learn based on which parameter you will decide which nail pullers are the best in quality and performance.
Here some of these points are described.
If you are a home user, then lightweight nail puller is perfect. On the other hand, for professional use weight is not a major concern. Hence you will use many times a day, the sustainability of the product is more prior to this case.
Length of the nail puller is a factor that actually relates to the needed force to pull off nails. If the nail puller length is very short, then you need to apply extra force to pull off nails. To get an extra leverage you should go for a bit long handled product.
Length is also responsible for the torque created by it. It is a function of force. Torque create the motion that presses the nails and applies the force to pull off it.
Again lengthy nail puller will create problem while storing this tool especially when you are a home user. So best practice is to buy a Nail Puller that length is in the medium range. Not short neither too long.
What is the source of power for nail puller is another concerning fact to consider? A nail puller can be self-powered by battery or as well can be operated by hand force. For home users, it’s better to skip battery power tool.
Because your work will not be so tough that you couldn’t do that by your hand. But for professional use, it’s better to choose one that is power by a battery with the charging system and a good backup. Neither it should be at least AC powered.
Mode models are Air powered. The used Air pressure to press off nails from wood. They are good at the work, but you need a constant air pressure machine to run this tool. If you have this, this will be the best one for you. Another option can be a magnetic nail puller that needs an electric power source.
A nail puller is one kind of nail digger. It needs to grip the nail head and pull off it from the surface. So it must reach the nail. Nose of nail puller should be narrow that it can reach any area of your work and can pull of nails from there.
Buying an equipment with a low duty cycle is just a waste of money. You must consider how long your tool will serve you. Long duty cycle means it can be reused for many times in a long time period.
There is no product that will give good service for an unlimited time period. But it should be made to serve for a long time with a good duty cycle. It must a strong hardware with a sustainable structure and joint to ensure its long-term durability.
The Nail pullers must have a handler made of metal that is strong. It must have a grip made of rubber. That will ensure that you won’t slip the tool unconsciously. Again there must be some safety extension at the top of the handler to avoid the safety concerns.
Damage to the Surface
A good nail puller will not create and scratch or damage of the workpiece while pulling of nails. So its bottom layer of jaws should be smooth, super finished and round in shape to minimize the potential work surfaces damages.
How to Use a Nail Puller
Here are some frequently asked question about nail puller that might help you before buying it
Q. What types of work can I do by nail puller?
Ans: Nail puller is mainly used to pull off unnecessary nails from wood. You can also pull off staples and pallet nails from a surface that are not needed anymore.
Q. Will it damages the surface?
Ans: Amount of damage of your work depends on how much good the nail puller is. If the nail puller’s jaw is well designed and furnished well, then the amount of damage will be low. Even it can be zero for some models. But in most cases, nail puller will damage the area around the nail head after detailing.
Q. Can I use it as a hammer?
Ans: In some Nail pullers, there is the option of the hammer that is attached to the opposite side of jaws or head. But if there is no option, you can’t use it as a hammer. So better to see the feature before buying.
Q. Is there any alternative to nail puller?
Ans. Yes. There is some alternative tool to pull off nails. It can be found in a shop or you can customize as well. But for denailing nail puller is much more efficient than that. For professional uses nail, the puller is a must.
Q. The jaw of my nail puller is being broken. What can I do?
Ans: If you are a DIY welder, then there is no issue, you can fix it by yourself. Based on, how badly it broke need be weld it.
Q. What can be the power source for a nail puller?
Ans: There are 3 types of nail puller that are designed to run on different types of power. Most of the run by the force you applied by your hand. Some of them run by air pressure. And some of them are magnetic that needs electric power.
Being an important tool in your toolbox, it’s better to buy the best one that will help you in your work as well as will serve for a long time. Every tool has its merits and demerits. But you should choose the tool that suits your work most.
To buy the best nail puller, you must consider the safety, key feature, advantage, and disadvantages. At the time of using the tool, you must keep safety issue on the top of the priority list as the nails and nail puller’s head is so sharp. Keeping your eyes and ears open, will make your work more comfortable and flexible.