If you are interested in woodworking, to be a gainer, Japanese saws must have to be in your tool collection. Japanese saw nokogiri in Chinese is basically a category of saw used in woodworking and Japanese carpentry. There is a various category, models, good or bad exists in the market.
Japanese saws pull saws, were projected for softwoods while other saws like Western saws, or push saws, were intended for hardwoods. If you are looking for the best Japanese saw, you are probably at the best site.
There are various types of saw where each of them have their own particular set of characteristics. Japanese saws come in different styles, based on the type of cutting that needs to be done. So you should definitely go through this article to get the best.
|SUIZAN Japanese Hand Saw 6 inch Dozuki (Dovetail) Pull Saw for Woodworking||4.6/5|
|Ryoba 9-1/2" Double Edge Razor Saw for Hardwoods from Japan Woodworker 1.7mm Teeth Pitch||4.6/5|
|Gyokucho Razorsaw Ryoba Saw 180mm No. 291||4.6/5|
How to Choose the Best Japanese Saw
There is a large variance in blade size between different saws. Different sized saws are required for different cuts. For dovetails and complex cuts, a smaller blade is more suitable. If you plan on cutting deep tenons then you should choose the larger blade.
Although most saws come with an oval, rattan-wrapped handle, there are others available. As comfort and performance will be affected, it’s best if you can handle a saw before committing to it.
Weight is a serious issue in the case of saws to deal with. As for small or clean work, light weighted saws are comfortable. Whereas, for rough finished heavy weighted saws may work.
Folding or Not
Folding of a Japanese saw is pretty rare. Most of the saws don’t have the folding option but some of them have the advantage. These soft plastic grips of the folded saws allow comfortable work.
The blade size is one of the biggest influencing factors in cutting ability. Basically, bigger teeth are typically for softer materials, and smaller teeth are for harder materials. Bigger teeth cut faster and coarser blades also mean rougher cuts. If you need a smooth finish, use a finer blade. Two blades of different lengths by the same maker usually have the same number of teeth per inch, and it has replaceable blades.
If you are using Japanese saws, do not screw the blade. Try to keep it perpendicular to your work. If you are trying to make straighter, smoother cuts, will make the blade last longer, and help the blade remove sawdust efficiently. Use as long as strokes as possible, as they are easy to control.
Best Japanese Saw Reviews
1. Ryoba 9-1/2″ Double Edge Razor
It is actually made up with the concept of traditional Japanese pull-stroke saw completely in modern variation. The saw is suitable for any kind of general woodwork as the saw has two parts for crosscutting and ripping. It is remarkable that like any other crosscut saw, this cross cut saw had also a slow rip cut. For the purpose of accurately cross-cutting, the saw is best Japanese Saw.
Things We Liked Most:
- The product is upright for hand tool woodworking and it is also easy to know the process of using it. While trimming, it works incredibly because of cutting in one side and stripping at another side.
- The teeth of this saw are very hard and the sharpness of the blade remain for a long time. The process of blade replacement is easy, and you just have to give order for a blade when the sharpness of the will get less.
- Working with Ryoba saw is comfortable for those people who have back pain because they don’t need to bend over the saw so much they can do their sawing operation by standing straight.
- You would get trouble for hardwood cutting.
- Block plane or at times hand plane need to use for cleaning when the rough cut come out because of having no stiff back plate.
2. Gyokucho 770-3600 Razor Ryoba Saw with Blade
770-3600 Razor Ryoba saw is made by Gyokucho and the saw is an actually modern version of best traditional Japanese pull stroke saw. The length of the saw executes fine kerf. The blade consists of rip cut on one side and crosses cut on opposite side so people get the benefits of two different cutting process in one product. The unique gadget of the saw is its handle, as the handle can be bent regarding the blade. Different types of the blade can be used in this specific saw.
Things We Liked Most:
- The blade of the saw is perfectly suitable for hardwood cutting and the blades are so flexible to use.
- Cutting accuracy of this blade is stunning and effortless for fine finishing cut both for cross cut and rip cut.
- The teeth of the blade are very sharp and easy to cut the end of the grain from both sides.
- The handle of the saw is wrapped with rattan because of safety griping.
- People can easily carry the saw in a working bag or any kind of toolbox and It is inexpensive
- While stranded bamboo cutting, the saw may get dull easily.
- The finish cutting is rough, so you might not want to use in you finishing touch of woodworking.
3. Dozuki “Z” Saw
This saw is the top-selling Dozuki in Japan. The crosscut tooth blade had a slight effect compared to its ripping abilities, on the basis of performing the rip cut with speed and accuracy this is the best Japanese Saw. In both the crosscut and rip test, Dozuki “Z” Saw constantly have a sawn surface that was flat and smooth. This small Japanese hand saw is used for recording and cutting panels.
Things We Liked Most:
- For smoothest cutting and straight cuts with finesse, the Dozuki “Z” Saw is one of the best choices for you.
- Dozuki Saws have replaceable blades feature the precision and strength of tensioned steel blades which are easily detached.
- It is very efficient saw, and the saw is more controllable. This saw is highly recommended for beginning users of Japanese Saws.
- It is sharper and cuts the thinnest kerf than most of the saws.
- This is not a saw for cutting tree live or green trees limbs of branches or the oak.
- It works fabulously in softwoods but requires a bit more practice in harder.
4. Japanese Mini Dozuki Panel Saw
Dense saw body with the finest blade of this saw is ideal for complicated and accurate works on general wood materials. It has ease of use and straight guts. This saw is very sharp to cut any kind of woods. Veneer is thin and the slight inward angle of the blade is apt to be harmless.
Things We Liked Most:
- The handle feels great, you can tell the blade is done with the pure workmanship. It’s enormously precise and repeatable.
- This saw is great to cut paper-thin line over wood, as it is flawless while jointing woods accurately. Small cuts are precise to make.
- The “woodpecker” of the tooth on the end of the saw might scribe your cut more effortlessly.
- The handle faces downwards which is awkward to use when positioned against a straight edge for a long cut.
- If you have a strategy on cutting very deep, this saw is not for you.
5. SUIZAN Japanese Hand Saw pull saw
SUIZAN Japanese Hand Saw pull saw, this Japanese Style Pull Saw is used for cutting off additional wood without damaging the surrounding. Two blades in one saw: there are Cross-Cut and Rip-Cut teeth on a single handle. The blades are replaceable and interchangeable. It is extremely versatile.
Things We Liked Most:
- This little saw makes speedy, clean work out of general construction where getting out a power saw would be inconvenient.
- It will crosscut without blustering dust in a mess compared to other Japanese pull saws. The handle has a light at the lowermost to mark the pull stroke easier.
- It took time to get used to, but once you get comfortable with using it this saw will be your best choice.
- It may work properly but sometimes it quickly became dull after only some cuts.
- Blades on both saws were off center from the handle shaft.
6. SUIZAN Japanese Hand Saw 6 inch
The coarseness of the blade allows to cut the depth a little deeper, but it also is influenced by on thickness and width of wood matter you are cutting. The back of the blade is rigid, which keeps the blade bring into line flawlessly and makes straight and more precise cuts. If you are preferring small staffs to make, the shorter blade of this saw might make it easier to control it. It has a little plastic cover over the blade, while you can use to protect it preserving it.
Things We Liked Most:
- For cutting wooden dowels, this saw is much easier to deal with. Bigger pieces of woods cut smoothly by this saw.
- It has the controllable length of small and finishing work.
- It slices softwoods and hardwoods very speedily and accurately.
- If you are interested in DIY works, this saw is a perfect choice for you. Even you might use this for cutting small pieces of driftwood for your
- It cannot dovetail some timbers i.e., oaks.
- Though the blades are very sharp, the quality of the materials not decent.
The Specialty of Japanese Saw
- Unlike the American saws, it cuts through the pull strokes. While using the Japanese saws, the pulling motion pulls the blades straight which removes bowing. If you are very accurate and precise, then Japanese saws are the best option for you.
- Several aggressive teeth of this saw are for making the rip cut, rip cut is cutting with grains. The opposite side, the finer teeth, of the saw are for doing crosscut.
- It is powered particularly by human effort and does not involve electrical power supply. This is less expensive than other saws. Power saws can cut quickly, which may lose control.
- A Western saw is thicker and hardened in order to resist the pushing force when cutting.
- So Japanese saws are lighter, and basically, it is easier to work with and it saves money than other saws.
Japanese Saw and its different Parts
There are several parts of Japanese saw:
Saw handle: The handle portion is gripped by the operator. In order to cut wood, this is castoff to move the saw back and forth through the material.
Saw blade: Classically the blade is prepared from steel and has a number of sharp teeth running along its bottom edge. The teeth are the part that penetrates the material first when cutting. All frame saws have removable blades.
Front and Back of the saw: Observing from the side, the bottom edge is called the front, and the opposite edge is called the back. Basically, the parts, especially the front, of the blade contains saw’s teeth. In some cases the back parts also contain teeth.
Saw frame: In some cases, saws have a frame which spreads out of the handle and attaches to the other end of the blade. For example Hacksaw etc.
Heel & toe: The end part of the blade, closest to the handle, is called the heel, and the opposite end is called the toe.
What Should We Do When a Japanese Saw Is Working
Sometimes individuals would have trouble to use or take steps while using the Japanese saws. Hence, at this point, I am going to give you little tricks on what you might do when a Japanese Saw is working.
- First thing is, you are going to make sure that, you have marked the cut area, while you may use Japanese marking knife or any sort of similar things.
- Put your index finger to stabilize the material or wood part in the base. Put your arm in the line to the saw to have a straight line.
- Different blades of different Japanese saws cut different kinds of slices, the teeth literally slice through the wood, almost planed.
- Here is the little trick is that if you are wanting a straight cut then you need to bend the saw at 30 to 45-degree angle while cutting at the front edge and bend at the opposite side while you are cutting at the last edge.
- On some Japanese saws, the teeth are minor nearer the handle to have a series of small strokes to cut.
Various Types of Japanese Saw
The Kataba is a particular sided saw which does not require a stabilizing back and can thus be used for deep and long cuts. The Kataba saws are ideal for deeper cuts. If you are looking for general purpose cutting while providing fast cut, and available with crosscut and rip cut teeth. Kataba saws remain sharp for a considerable amount of time.
Kugihiki saw is one of the finest saws which is used for sawing off dowels close to the surface without damaging this. The Kugihiki or flush cutting saw has a remarkably reedy and flexible blade. Moreover, this gives more stability to the very thin saw, and this gives much greater control.
Ryoba saw is a current addition to the Japanese woodworker’s toolbox. This is a unique type of fast, durable widespread saw, and this is ideal for deep cuts both across and with the grain. It is used in the workshop or building site. The saw with the blade is our most sold saw with impulse hardened teeth.
This Dozuki Saw is well-known for the suitable cuts it produces and a dipping function, for this kind of cuts that jump on the flat surface of a workpiece. The saw teeth are laser-hardened for a long tool life. It is more tolerant and will give you a very fine cut. The saw can also be used for length sided cuts.
Application of Japanese Saw for Dovetail
The application of Japanese saw the need to follow several key terms.
If using a Japanese saw, which cuts on the pull stroke, you should begin your cut on the near side of the wood. You must angle the saw so it is approximately equivalent to the layout line of the workpiece. When the finish grain kerf is recognized, then join to the sloped layout line. While your emphasis on the layout line, use your marginal vision to be aware of the saw’s upright orientation. The saw cut must not be moving at the baseline on both faces of the wood. Some woodworkers choose to end the marked layout line just at the baseline as a signal to ending the saw cut. Finally, think through the noteworthy issue of body mechanics for accurate sawing. The core muscles should be consciously engaged without being wooden.
How to Use a Japanese Saw
There is a short demonstration on how to use Japanese Saws for having efficient cutting:
- While using Japanese Saws, double check the area behind the material so that you don’t saw your sawhorse or anything else you might regret.
- To get conventional cuts, pay devotion to where you want the saw to go.
- Rust can be stopped by rubbing the blade with a light oil. Sharpening and setting saw blades can be done by hand.
- While applying the Japanese saw you need to be focused on warming up some cuts by repeating arm in a line way. Hold the handle with three fingers and thumb, and extend the index finger forward.
- To shield your face and eyes from fragments flying, you must always wear a safety mask and eye protection.
- To prevent clipping and rebound of the hand saw, you must always start off slowly.
- You must stock your hand saw in a safe, enclosed place.
Frequently Asked Questions (FAQs)
Q. Is the blade of Japanese saw replaceable?
Answer: Yes, most of them are replaceable. Japanese saw with replaceable blades are often used.
Q. What does Dozuki mean?
Answer: A Dozuki is a pull saw that is often used by master carpenters and woodworkers.
Q. Do the blades of Japanese saw can be sharpened?
Answer: Yes, the blades can be sharpened.
Q. What is a “Pull Saw“?
Answer: Japanese saws cut materials over pulling which are called “pull saws”.
Q. What is the difference between Japanese saw and western saw?
Answer: Japanese saws are powered by human effort and do not involve electrical power supply.
Q. What is a crosscut saw?
Answer: A crosscut saw is intended for cutting timber perpendicular to the timber grain.
Japanese saws are perfect for you if you are a woodworker. When used gently and elegantly, Japanese saws are a total exposure. Here is the description of a different kind of Japanese saw. You may choose your best Japanese saw according to your requirement, or purpose of work. Japanese saws are used across the world.