You may cut wires by a regular cutter but if you want to cut out the wires more smoothly and with nice finishing, the preferred tool for you is the best flush cutter.
Flush cutters are applied on regular, soft and half hard metal and essential for the clipping of eye pins, headpins and beading wire for getting perfectly flush ends.
The blades of flush cutters are made of various types of materials which can be very conducive for a plane and flat cutting. The jaws are so sharp and the shaft is so perfect for felicitous cutting. The fitting sized handles are quite unimpeachable for a great balance during the performance.
Flush cutter is not for only the wire cutting but also can be used for jewelry fitting purposes. If you are not professional with this type of working but this article will ensure you the most ideal performance during your cutting or any other working experience.
|Xuron - Xuron - 170-II Micro-Shear Flush Cutter - 170-II||Check on Amazon|
|Hakko CHP Micro Cutter, Clean Cut, 16 AWG (set of 5)||Check on Amazon|
|Delcast Flush Cutter Pliers, 12 AWG Cutting Capacity||Check on Amazon|
What is a Flush Cutter?
Flush cutter is a very popular tool used for jewelry making which is used as a wire cutter. This specific tool is highly recommended and useful to give smooth, flat, neat and clean finishing of the jewelry.
This cutter is considered one of the best flexible beading wire which cuts multiple steel fibers and creates a perfectly straight cut. They are also used for jump rings to flip the wire end without hard effort by the labors in this making procedures.
Why You Need a Flush Cutter?
Flush cutter is the perfect choice for metal workers especially jewelry makers. Flush cutters are particularly applied as flush cutting smithereens, wire cutter and so on.
Other tools are not imperfect but with those tools, you may give extensive pressure or may pay more money or the size can be bigger. The pocket-sized of the flush cutter and great functions and manufactures will guide you in happy cutting or trimming. That’s why you need the best flush cutter for your cutting purposes.
Best Flush Cutter Buying Guide
The best way to buy the perfect flush cutter is to consider the task you want to perform. You can use flush cutters for maintenance around the house or for jewelry. They are also helpful in electrical workplaces where there are wires and wicks to work with.
Each flush cutter has different performance and capabilities. To select the best one these following features matters before buying a flush cutter:
Flush Cutter Size and Quality
When you want to cut thick metal, you must use that kind of a flush cutter that has a strong cutting edge. But when you cut a thin metal, you must use that kind of flush cutter that has the less strong cutting edge.
So, it’s important to know the type of product that you want to cut. Because it differs the flush cutter’s size and quality.
How to Operate
For the beginners, it is essential to look carefully at the operating procedure. If you are a beginner, you don’t want to deal with a robust operating system flush cutting tool. Mostly latest model comes with comfortable using facilities.
Warranty and Budget
Different types of flush cutters have the different price range. It depends on the quality and performance. For maximum performance, invest a bit more.
Look for the warranty as well. If there’s any warranty, then see how to apply for the guarantee facility and how much time this warranty will last.
Best Flush Cutters – Our Top Picks
1. Xuron 170-II Micro-Shear Flush Cutter
The Xuron 170-II is a flush cutter which is made up with two handles and jaws and this is for shear cutting soft wire.
This tool is for your most comfort while cutting wire or doing any wire work. It has nonslip hand grips which will serve you the most comfort and control of your hand for smooth working. The Xuron 170-II flush cutter is alloy steel with return spring which requires inconsiderable hand stroll.
Flush cutters are the savories cutters which are ground to the summit of the cutting border on one jaw side, accommodating an even cut. It is commonly used for trimming copper, brass, aluminum, steel wires, and iron, and also used in exactness electronics and jewelry fixing.
This flush cutter is great but however, its jaws don’t open very widely as you may think for cutting any thick cord. And the sharp blade is obviously risky for you so, be careful with it. Don’t give extra pressure on it as it is narrow and enough sharp so, it will work its best for sure.
2. Klein Tools D275-5
Klein Tools are mainly for the purpose of cutting, espying wire, flushing with an adjoining surface. The flat ground cutting edge of these products are very useful for cutting leads off of dredged materials on circuit boards and other inflictions where a flush cut is desiderated.
Klein’s precision flush cutter reaps soft wire up to 18 AWG conducting a flat, straight cut and the ultra-scrannel profile generates it easier to get into tight positions. Cushioned grips and its steel spring return the favor when making repetitious shears.
Klein Tools can be very essential of your electronic tool-box when you want precision and control while cutting soft wire.
These Klein Tools is for mainly to cut the tails off plastic zip ties and can easily cut 18-gauge copper wire, which is fairly small but it won’t cut anything harder than copper. If you want to work on jewelry with it works often but they would get dull, so, you should be the concern with its limitations.
3. Hakko CHP Micro Cutter
Hakko CHP Micro cutter is specially used as flush cutting snips, wire cutter and so on. This product has jaws which are precision ground and if you apply them for what they are designed for and the jaws will stay incisive.
The grip is excellent and works smoothly for good balancing and the cutting blades are perfectly matched up and are even-ascertaining a fantastic close clean cut on wires or cable ties. They are so durable for being made of hard metals that retain their tight cut.
As like all cutting products Hakko has also several limitations like you can’t give extensive pressure for cutting too thick wire or something else then it’ll be ruined. Then you must be aware of the sharp blades for your own safety.
Like so many products nowadays they are no longer of long-lasting quality they used to be. You may be given up trying to get the best flush cutting wire cutter until you have found the Hakko CHP Micro Cutter< Clean Cut 16AWG.
4. Delcast MEC-5A Flush Cutter
Delcast MEC-5A is a cutter spanner that permeates without facing any trouble through almost any material with one swift and spontaneous gripping movement of the hand.
This product consists of the jaws those are manufactured of a high strength manganese steel shaft, rated Rockwell hardness 65. Delcast is high durable flush cutter with this manganese steel shaft performs smoothly that provides for resistance to tarnish and digestion.
The handles of the Delcast MEC-5A are spring-loaded so that there would be no need to manually pry them open. This flush cutter is necessary as the great handy tool for working in electronics and anything with cabling, which includes cutting zip ties flush.
It’s pretty sharp that you may easily cut plastic wires as well as copper wires without any extra effort. So, during working, you should be careful with it for keeping away from being dullness. And the smooth performing ability can be ruined easily by giving excessive pressure on it.
5. Performance Tool W30763 5″ Angled Flush Cutter
5 Inch angled flush cutter is an excellent arsenal of electronic tool-box and its manufacturing system generates high durability and comfort for working purposes.
This product consists of heat-treated steel, spring loaded jaws and ergonomic non-slip molded grips that provides durability and a great long life. The grips that maintain the load or pressure for delivering the most comfortable feeling during working with it.
This performance tool is offset at 30 so that it can propagate closer and more appropriate flush cuts. This flush cutter is can be applied on copper and any soft wire up to 16 gauges. The performance tool 5” angled flush cutter is perfect for flush cutting in detail as, like wire, mono and braid knots and zip-tie ends without facing any problems.
As though the fine texture and sharper jaws offer perfect and smooth flush cutting, these jaws are must be applied on avoiding harder wires otherwise they will become dull. Giving superfluous pressure on it may cause destruction for this 5 Inch angled flush cutter.
How to Use a Flush Cutter
The process of using the flush cutter is more or less similar for different wires. When you use a flush cutter, the grips will make you feel more comfortable and better balancing which will be not felt with other tools for wire cutting.
For cutting thin wires you need to hold on at the end so it does not spread out or jump out at the floor. For thick wire cutting, you need to be careful about holding it and give a high energy towards it.
The cutting blades are stainless matched up and are even-determining a fantastic closer pure cut on wires or cable ties. The wires are must be of soft and half hard metals, otherwise, the blades can be ruined or dull for further using.
Frequently Asked Questions (FAQs)
1) What is the basic difference between the angle flush cutter and flush cutter?
Answer: Flush cutter gives a flat cut on one side and diagonal cut at the other, whereas angle flush cutter gives diagonal cut each side.
2) Can professionals use the flush cutter for jewelry making?
Answer: Yes, the tool is the perfect choice for them.
3) Is flush cutter good for cutting jump rings?
Answer: Obviously, it would be an excellent option for you to use the flush cutter for this purpose.
4) Can flush cutter cut gauges and materials?
Answer: You can cut up to 18 gauges, but more thick steel cutting you should avoid it.
You may search for the best flush cutter, while this article will guide you in picking up the best flush cutter for happy cutting. Your electronic toolbox can be better and more fulfilled only by adding a flush cutter for cutting wires or cables and so on.
Of course, all cutting tools have risks of cutting or getting harmed for you during applying for their sharp blades. Sometimes, people may think that the sharp blades can cut also hard or something else but it can’t.
During applying on this type of hard things you will feel that you are giving extensive pressure for cutting which may cause dullness for your cutter.
So, these hard things should be avoided for a flush cutter and then you can keep your flush cutter for so long time and so durable.