A saw is a tool that you rely on it to do your job with a clean, smooth and efficient way. Importance of crosscut saw remains as the same as it was till it was made for its efficient design and flexibility in works. Having a crosscut saw with great features in your tool list will reduce the tension about wood and timber. But you must need to consider different factors that suit your works most.
There are different types of a crosscut saw having different features. Most of the saw found in the market are either one man operating or two men operating. the tool needs to maintain some facts that will ensure the best outcome from it.
Before choosing the best one for you, you need to consider all of these things. Here some of the best crosscut saw are discussed with their pros and cons. Some FAQ and explanation.
Why This Is Called Crosscut Saw
The word saw indicates it as a tool that is mainly used for cutting something. Crosscut indicates that it cuts wood across the grain of the wood. Crosscut saw or also known as “thwart saw” is a hand operating tool that is used for cutting across the grain of a wood.
This tool cut a wood across it especially the grain of the wood. You just need to hold the handle of the saw and placed it on any timber. Then just pull back and forth with a little force.
It can be done by one man or two men as well depends on the type of the saw. As this saw cut in this cross method, that’s why this tool is known as Crosscut Saw.
Understanding Crosscut Saw tooth
Crosscut Saw has a sharp and long blade to cut. In the blade, there are a lot of teeth that are small and close to other and are aligned in a specific pattern.
The pattern of the teeth is very important for the working purposes and procedure of the tool. the performance, speed of cutting, durability and working force are highly depended on the alignment of the teeth on the blade. There are several methods of aligning teeth.
They are plain tooth pattern, M tooth pattern, Great American tooth pattern, Champion tooth pattern, Lance tooth pattern and perforated lance tooth pattern.
Teeth Per Inch
Teeth per inch indicate the number of teeth per inch of the blade that cut and remove the joint of the grain. The more teeth per inch, your tool will work better to cut smoothly.
Tooth Angle is the angle of the side of the teeth with the edge of the blade. Tooth angle is responsible for how the saw will cut your stuff. It can be 90 degrees or smaller than that depending on the working purpose of the crosscut saw.
The materials used in the tooth is responsible for the durability of the teeth. It also decides how sharp and sooth the blade will cut the trees.
Blade size is the total length of the blade excluding the handle. if the size is short it will be easy for little works. But it will be hard to work big works with this. On the other hand, if the size is enough bigger then you can use it to cut big trees or timber at the same time uncomfortable to use as a home tool.
Some of the Best Crosscut Saw
1. Stanley 20-526 15-Inch 12-Point/Inch Sharp Tooth Saw
Stanley 20-526 15-Inch 12-Point/Inch Sharp Tooth Saw is a product which has sharp teeth and it is long enough than standard teeth. It is mainly designed for improve console and to get a better grip.
It has a fat grip as you can handle it properly and for a good stroke, it has perfect length. You can cut a line straight and clean by using this saw. You will get its handle very strong and its teeth are sharp enough to cut anything easily.
This saw can be used to cut tree limbs, pinewood derby cars, wood etc. To prevent buckling on the compression downstroke it has a perfect thickness to length ratio. This product can cut items rather than electric saw.
The supposed “welded” handle of this saw can come apart. So sometimes you will need to add extra pics to stable the handle. It’s not sharp or sturdy as compared to other saws. To do the work it takes extra time and strength.
Sometimes you will not be able to get perfect cut because of its cheese grater look. It can be become dull after using some month. This saw is a flimsy piece of material.
2. GreatNeck N2610 Cross Cut Hand Saw
Great Neck N2610 – 26 Inch 10 TPI Cross Cut Hand Saw is a high carbon steel hand saw with aggressive tooth pattern. Each tooth are sharped enough which helps to cut any item, especially wood, plastic etc.
It has a hardwood handle which is weather resistant. The handle is hefty enough and can adjust to any one’s individuals hand. This saw has rip filed teeth and can perform a common hybrid cut.
After correcting the set, it tracks well and makes a good crosscut. By using this saw you can cut wood very smoothly and very comfortable to hold the saw. You can finish your cut with this saw very neatly and cleanly.
You have to manually set this saw by yourself and for this, you need to purchase some extra materials. The saw can be drift right or left while cutting something.
Sometimes the teeth can be drag a bit, so you need to re-position those teeth. Its too stiff and does not perform as musical instruments do.
3. Crosscut Saw
Crosscut Saw is exceptional for its unique design and working procedure. It has ultrathick and double layer blade that will give you the ultimate comfort and flexibility to use.
The handle of this saw is much big than the other one. In the handle, there is a good grip rubber that will ensure that the saw will remain in your hand during work. The teeth are sharp and density is high. The thickness of the blade is too low. It will help you to cut a wood sharply.
It has a kerf in the joint. The weight of the saw is many times lighter than an ordinary saw. It will add more comfort and flexibility to your word.
The blade of the saw is nonremovable. The blade is not that much longer. The length of the blade and the handle is almost same. You can use it to cut tree or big wood. The blade is so thin that it may bend anytime in the case of applying extra force.
4. Stanley 20-065 ShortCut Saw
Stanley 20-065 26-Inch 12 Points Per Inch Shortcut Saw is a special saw which is used for laminate, plastic pipe and all wood type works. This saw does not take much time for cutting items. Its teeth are sharped enough to cut things easily.
Its teeth are 3 to 5 times sharper than standard teeth. You can cut items 50% faster than conventional Stanley handsaws. For added comfort, this saw has hardwood handle. You can cut straight and true down the marked line by using this saw.
It does not get stuck while cutting things. It can cut plywood, hardwood, softwood dried or green whatever you want to cut. It is a nice inexpensive saw for the hobby woodworker.
The teeth cannot be sharped again, so when teeth will get dull you have to replace them. Because of flex in the saw blade which causes binding up. The blade is not particularly thick and has no stiffener.
The size of this saw is much bigger, that’s why some users do not feel comfortable while working. Sometimes you need to slow down your sawing motion otherwise it can be broken down.
5. Two-Man Crosscut Saw
Two man crosscut saw is a hand hammered saw which is designed for two person team with two hardwood handle. Its sharp teeth can cut any bulky especially woods or trees at a short time easily. People choose it because of its quick performance while cutting items.
Its teeth are more sharped than a normal saw and also big enough. Two men are needed to deal with this product, which makes your work fast and easily. The size of the blade is very big and Robust, so the blade will not crush into pieces.
While cutting wood or tree this saw does not stick and will not pierce. The handle is robust enough and can adjust to any one’s individuals hand. Teeth can re-sharped when they will become dull and blunt.
The main disadvantages of this product are while dealing with this you will need two men, otherwise you can not handle this saw by yourself as it big enough. For setting handles you will need purchase some extra item.
Sometimes while cutting trees the handle can break down, so then you have to externally install the handle. As it’s a big saw so while carrying it you will have to face some trouble.
6. IRWIN Tools ProTouch Coarse Cut Saw
This Crosscut Saw is a 24-inch-long tool that means you will have a long blade with this. With this long blade, you will be able to cut any kind of wood with a large amount at a time.
What are the key advantages of the tool
This tool has M2 advanced Tooth Technology that gives the tooth more sharpen and power. This is a new and patent-pending technology. It has many advanced features that will ensure the best quality of cutting the wood.
It can perform at any kind of wood smoothly. This tooth geometric align will allow you to cut the wood faster and efficiently. The teeth are tri-ground that ensure the durability of the teeth even in the tough condition. It has deep gullets that will help you to remove the chips rapidly.
Its handle is rubberized that will protect you in from sleeping the tool in any case. It will also give extra grip to hold the handle that will make your work more flexible. Its blade is thick and strong. Its front teeth are such made to provide the rapid and smooth start of your work.
Its nose is tapered pitch. It improves the clearance and the stability of the blade while starting the work. Its handsaw is specially designed for coarse cutting.
7. Lynx 4′ Two Man Crosscut Saw
Lynx 4′ Two Man Crosscut Saw Came with two handles that means it can be used by two men. This feature gives the crosscut saw more stability and user will be able to cut saw with less force.
It has a thick and well-made steel blade. Each tooth of the product is handmade that ensure the best quality and durability of the product. It has a lightweight. It has two large handles. The handles are made of beech.
The saw can be resharpened. For this, it will need a triangular file. It will reshape the teeth to increase the angle on the inside of these. The blade is made of high-quality steel and thick that cut the grain without an extra force. Each tooth of the blade is a handset. That ensures the best quality of each and every tooth on the blade.
There are some demerits of this saw as well. The weight of this tool is little more. That will need extra force to work with it. As it is a two-man operated saw. It needs a large space to work. Another problem that you may face with this tool is to keep it safe for its extra length.
What Is Crosscut Saw Used For
Crosscut saw is an old tool most used by the carpenters’ from the beginning till now. It is used to cut trees, dividing them into pieces and so on.
Felling saw is used for cutting trees and take down them. This type of saw doesn’t have any moving blade. It has one or two teeth per inch for the optimum use of the blade. This type of saw is mostly used by lumberjacks. Bucking saw is used for cutting wood that is already taken down i.e. after cutting the trees.
Crosscuts saw can be subdivided into many more types. As an example, Backsaw that is mainly used to make the cabinet. It has up to 16 teeth per inch. A handsaw is used to cut cardboard. It cuts smoothly across the grain.
Crosscut saw can be one person or two persons operated. Normally two-person operated crosscut saw is used to cut trees and long wood whereas one person operated saw are used to cut small wood.
In most of the cases, they are used for cutting trees. When the trees come at the sawmills, carpenters used it to cut the tree into many small pieces and then to make furniture and so on.
Crosscut Saw vs Rip Saw
The main difference between a crosscut saw and a rip saw is in the shape of teeth on the blade. In crosscut saw, teeth are aligned maintain an angle on both sides of the teeth on the blade. As it is aligned with an angle on the inside edge, it acts like a series of many knives.
It slices through the wood while cutting. So, you can easily cut a wood across the grain of it. As it is difficult to cut across the grain, crosscut saw is used in this job.
On the other hand, teeth of the rip saw are not angled. They are set at 90 degrees on the inside edge. So that instead of acting as a series of knives, it acts as a little full blade of chassis. So that with this one it’s easy to cut with the grain of a wood or along it.
One Man vs Two-Man Crosscut Saw
According to the using method, crosscut saw can be two types. One is One man operated and the other one is two men operated. In one man crosscut saw, there is a handle on one side and the whole other portion of the tool is the blade.
One may need to hold the handle and wok with force to cut wood. In some model, it can be power by battery and have a moving blade that makes the work 100 times easier. Mainly one man operating crosscut saw is used to cut small diameter wood into parts.
On the other hand, two-man operated crosscut saw is longer than the one man operated the tool. it has two handles on the two opposite side of the blade. Two men can hold the handles at a time and push back and front to cut any timber or wood portion. Mainly this type is used to cut trees/ timber or large diameter wood.
How to Sharpen Crosscut Saw
The blade and teeth of the crosscut saw are typically made of soft steel. That’s why it requires regular sharpening for the best outcome from the saw. You must sharpen the teeth of the blade from the two angles on the inside.
There is some tool called clamp to sharpen the teeth. You need to use this from the inside part of the teeth and pull back and forth this on the teeth of the blade. Actually, sharpen means reshaping the angles of the teeth. For this after this, the amount of steel on the teeth will decrease.
So, at the time of sharping, you must beware of the fact that you do not erase or sharp to too much. If the amount of steel decreased too much, the strength of the teeth will also decrease. As a result, teeth may be broken any time while working with this.
Before buying a crosscut saw, there may a lot of question in your mind. There is the answer to the some frequently asked question about crosscut saw:
Q. Can Crosscut saw be resharpened?
Ans: Yes. In most of the cases, You can resharpen the teeth of your crosscut saw according to your need. But in some model, you can’t resharpen the teeth. It depends on the shape and designs the teeth are set.
Q. How many times can I resharpen the teeth?
Ans: It depends on the material and depth of the teeth. For one time sharpen, the teeth will lose a large amount of its material. So, if you sharpen too much the depth of the teeth will decrease quickly.
Q. Which one should I buy? Rip Saw or crosscut saw?
Ans: there is some basic difference in the working of Ripsaw and crosscut saw. If you want to cut a wood across its grain, crosscut saw will be perfect for you. Again, you are willing to cut wood along the grain, rip saw is the best one for this.
Q. Can it be battery powered?
Ans: yes, some crosscut saw can be battery powered. This type of crosscut saw is mainly one person operated. It has a moving blade that needs battery power. Moving blade cut the wood or tree.
Q. Can I attach a different blade to my crosscut saw?
Ans: you can change the blade of your saw, but it must be the same type of blade as it was. You can’t use a different type of blade to your crosscut saw.
Q. Some of the teeth are broken. What should I do?
Ans: As all teeth are set on the blade, you can’t replace teeth individually. You must replace the full blade.
To make a wooden furniture or to cut a tree, crosscut saw is a must. But as well the sharp teeth threaten the safety of the workers. You must consider the safety at first priority. For the best output, you must check all the parameters to be a good one.
After buying it the maintenance of the saw is also an important task for the best output for a long period of time. You must sharpen the teeth according to the need. There are different models and types. You should choose the saw that suits your work most.
Having the best crosscut saw definitely will make your work more comfortable, but at the same time, you must be aware the other maintenance and safety issues.